Zeror.ai Error Codes KUKA KRC2-1104

KUKA KRC2-1104

Brand: KUKAModel: KRC2Error code: KRC2-1104

What the Fault Means

Ackn. regulator limit exceeded <axis number>

Likely causes

  • Follow--up message to status message “Regulator limit exceeded <axis
  • number>”.
  • Following error too great. The axis does not follow the command value.
  • If the acknowledgement message appears without being preceded by the
  • corresponding status message, only the following error monitoring has
  • affected the kernel system.

Solution and Safe First Checks

  1. Acknowledge message.

Safety: do not work inside the panel without isolating the power; if unsure, consult a qualified technician.

Related KUKA error codes

Source: the Zeror.ai industrial fault database and KUKA technical documentation. This page is for information; on critical systems follow the manufacturer's manual and authorised service.

KUKA KRC2-1104 · Zeror.ai