TRENRUES
Sign InStart Free
Zeror.ai Error Codes KUKA KRC2-1437

KUKA KRC2-1437

Brand: KUKAModel: KRC2Error code: KRC2-1437

What the Fault Means

Reposition

Likely causes

  • BCO not achieved when returning from the interrupt program.
  • The robot must be repositioned to the interrupt point before the end of the
  • interrupt program, e.g. with LIN $POS_RET.

Solution and Safe First Checks

  1. Alter the program accordingly.

Safety: do not work inside the panel without isolating the power; if unsure, consult a qualified technician.

Detailed diagnosis with AIAnalyse this code step by step for your own machineConnect to an expert engineerLive engineer support if it is not solved

Related KUKA error codes

KRC2-2035Invalid block numberKRC2-213Error writing to BOSCHKRC2-2008Block cannot be modifiedKRC2-2271Path expression required (array)KRC2-2854MDR: Motion driver returns error <error number>Volume actual value cable failureVolume actual value cable failure

Source: the Zeror.ai industrial fault database and KUKA technical documentation. This page is for information; on critical systems follow the manufacturer's manual and authorised service.