TRENRUES
Sign InStart Free
Zeror.ai Error Codes KUKA KRC2-2961

KUKA KRC2-2961

Brand: KUKAModel: KRC2Error code: KRC2-2961

What the Fault Means

Current mastering data was NOT saved.

Likely causes

  • Saving of current mastering data failed, either because the robot was not
  • at an absolute standstill (all brakes must be applied), or because the
  • communication interface to the DSE was occupied.

Solution and Safe First Checks

  1. Stop robot, wait until the brakes are applied, and save the current mastering data again.

Safety: do not work inside the panel without isolating the power; if unsure, consult a qualified technician.

Detailed diagnosis with AIAnalyse this code step by step for your own machineConnect to an expert engineerLive engineer support if it is not solved

Related KUKA error codes

KRC2-2949Time synched motion requires equal program run mode on all controlsKRC2-1243Line <line number> in <module name> too long. Line was cut offChange of direction not possibleChange of direction not possibleKRC2-2866Enter/exit requests cannot be issued with triggersKRC2-287PC fan errorMainboard temperature check not availableMainboard temperature check not available

Source: the Zeror.ai industrial fault database and KUKA technical documentation. This page is for information; on critical systems follow the manufacturer's manual and authorised service.

KUKA KRC2-2961 · Zeror.ai