TRENRUES
Sign InStart Free
Zeror.ai Error Codes KUKA Select startup

KUKA Select startup

Brand: KUKAModel: KRC SystemError code: Select startup

What the Fault Means

Select startup

Likely causes

  • - A command has been entered that is only allowed in the startup mode.

Solution and Safe First Checks

  1. - Select the startup mode.
  2. - Acknowledge message.

Safety: do not work inside the panel without isolating the power; if unsure, consult a qualified technician.

Detailed diagnosis with AIAnalyse this code step by step for your own machineConnect to an expert engineerLive engineer support if it is not solved

Related KUKA error codes

Target variable must be of type REALTarget variable must be of type REALVolume actual value cable failureVolume actual value cable failure<$variable> variable write protected<$variable> variable write protectedPOINT CONVERSION IMPOSSIBLE WITHOUT ABSOLUTE ACCURACY MODELPOINT CONVERSION IMPOSSIBLE WITHOUT ABSOLUTE ACCURACY MODELKRC2-309Block Select: BCO reaching in T1/T2 requiredKRC2-328KCP: connection error <TIMEOUT or DATA_ERROR>

Source: the Zeror.ai industrial fault database and KUKA technical documentation. This page is for information; on critical systems follow the manufacturer's manual and authorised service.

KUKA Select startup · Zeror.ai