TRENRUES
Sign InStart Free
Zeror.ai Error Codes Siemens A01069

Siemens A01069

Brand: SiemensModel: SINAMICS G120 CU250S2Error code: A01069

What the Fault Means

Alarm: Parameter backup and device incompatible

Likely causes

  • The parameter backup (on the memory card or in the drive unit) and the drive device do not match
  • The module boots with the factory settings
  • Example: Devices A and B
  • are not compatible and a memory card with the parameter backup for device A is inserted in device B.

Solution and Safe First Checks

  1. insert a memory card with compatible parameter backup and carry out a POWER ON.
  2. insert a memory card without parameter backup and carry out a POWER ON.
  3. if required, withdraw the memory card and carry out POWER ON.
  4. carry out a hardware reset (p0972 = 1).
  5. save the parameters (p0971 = 1).

Safety: do not work inside the panel without isolating the power; if unsure, consult a qualified technician.

Detailed diagnosis with AIAnalyse this code step by step for your own machineConnect to an expert engineerLive engineer support if it is not solved

Related Siemens error codes

F026Frenaj direnci aşırı yük - frenaj direnci çok ısınıyor16#81C9Invalid value for "Character delay time"F01659Fault: Denial of paramet. changeF01010Fault: Drive type unknownF00021Motor Toprak KaçağıF0002Aşırı voltaj

Source: the Zeror.ai industrial fault database and Siemens technical documentation. This page is for information; on critical systems follow the manufacturer's manual and authorised service.