Zeror.ai Error Codes Siemens A07922

Siemens A07922

Brand: SiemensModel: SINAMICS G120 CU250S2Error code: A07922

What the Fault Means

Alarm: Drive: Torque/speed out of tolerance

Likely causes

  • For p2193 = 1: The torque deviates from the torque/speed envelope characteristic
  • For p2193 = 2: The speed signal from the external encoder (refer to p3230) deviates from the speed (r2169).

Solution and Safe First Checks

  1. check the connection between the motor and load.
  2. adapt the parameterization corresponding to the load.

Safety: do not work inside the panel without isolating the power; if unsure, consult a qualified technician.

Related Siemens error codes

Source: the Zeror.ai industrial fault database and Siemens technical documentation. This page is for information; on critical systems follow the manufacturer's manual and authorised service.

Siemens A07922 · Zeror.ai