Zeror.ai Error Codes Siemens F36886

Siemens F36886

Brand: SiemensModel: SINAMICS G120 CU250S2Error code: F36886

What the Fault Means

Fault: Hub DRIVE-CLiQ (CU): Error when sending DRIVE-CLiQ data

Likely causes

  • DRIVE-CLiQ communication error from DRIVE-CLiQ Hub Module in question to Control Unit
  • Data were not able to be sent
  • Fault cause: 65 (= 41 hex): Telegram type does not match send list
  • Note regarding the message value: The individual information is coded as follows in the message value (r0949/r2124): 0000yyxx hex: yy = component number, xx = error cause

Solution and Safe First Checks

  1. Carry out a POWER ON.

Safety: do not work inside the panel without isolating the power; if unsure, consult a qualified technician.

Related Siemens error codes

Source: the Zeror.ai industrial fault database and Siemens technical documentation. This page is for information; on critical systems follow the manufacturer's manual and authorised service.