Zeror.ai Error Codes Siemens A08565

Siemens A08565

Brand: SiemensModel: SINAMICS G120 CU250S2Error code: A08565

What the Fault Means

Alarm: PROFINET: Consistency error affecting adjustable parameters

Likely causes

  • A consistency error was detected when activating the configuration (p8925) for the PROFINET interface
  • The currently set configuration has not been activated
  • Alarm value (r2124, interpret decimal): 0: general consistency error 1: error in the IP configuration (IP address, subnet mask or standard gateway) 2: Error in the station names
  • 3: DHCP was not able to be activated, as a cyclic PROFINET connection already exists

Solution and Safe First Checks

  1. check the required interface configuration (p8920 and following), correct if necessary, and activate (p8925).
  2. Reconfigure the station via the "Edit Ethernet node" screen form (e.g. with STARTER commissioning software).

Safety: do not work inside the panel without isolating the power; if unsure, consult a qualified technician.

Related Siemens error codes

Source: the Zeror.ai industrial fault database and Siemens technical documentation. This page is for information; on critical systems follow the manufacturer's manual and authorised service.