Zeror.ai Error Codes Siemens F36895

Siemens F36895

Brand: SiemensModel: SINAMICS G120 CU250S2Error code: F36895

What the Fault Means

Fault: Hub DRIVE-CLiQ (CU): Alternating cyclic data transfer error

Likely causes

  • DRIVE-CLiQ communication error from DRIVE-CLiQ Hub Module in question to Control Unit
  • Fault cause: 11 (= 0B hex): Synchronization error during alternating cyclic data transfer
  • Note regarding the message value: The individual information is coded as follows in the message value (r0949/r2124): 0000yyxx hex: yy = component number, xx = error cause

Solution and Safe First Checks

  1. Carry out a POWER ON.

Safety: do not work inside the panel without isolating the power; if unsure, consult a qualified technician.

Related Siemens error codes

Source: the Zeror.ai industrial fault database and Siemens technical documentation. This page is for information; on critical systems follow the manufacturer's manual and authorised service.

Siemens F36895 · Zeror.ai