Siemens F01773

Qué Significa el Fallo

Fault: SI Motion P1 (CU): Test stop fail-safe digital output error

Causas probables

• A fault has occurred on processor 1 during the forced checking procedure (test stop) of the fail-safe digital output
• Fault value (r0949, interpret hexadecimal): RRRVWXYZ hex: R: Reserved
• V: Actual state of the DO channel concerned (see X) on processor 1 (corresponds to the states read back from the hardware, bit 0 = DO 0, bit 1 = DO 1, etc.)
• W: Required state of the DO channel concerned (see X, bit 0 = DO 0, bit 1 = DO 1, etc.)

Solución y Primeras Comprobaciones Seguras

1. Check the wiring of the fail-safe digital output (F-DO) and restart the test stop.

Seguridad: no trabajes dentro del cuadro sin cortar la energía; si tienes dudas, consulta a un técnico cualificado.

Códigos de error Siemens relacionados