Siemens F01773

Hatanın Anlamı

Fault: SI Motion P1 (CU): Test stop fail-safe digital output error

Olası nedenler

• A fault has occurred on processor 1 during the forced checking procedure (test stop) of the fail-safe digital output
• Fault value (r0949, interpret hexadecimal): RRRVWXYZ hex: R: Reserved
• V: Actual state of the DO channel concerned (see X) on processor 1 (corresponds to the states read back from the hardware, bit 0 = DO 0, bit 1 = DO 1, etc.)
• W: Required state of the DO channel concerned (see X, bit 0 = DO 0, bit 1 = DO 1, etc.)

Çözüm ve Güvenli İlk Kontroller

1. Check the wiring of the fail-safe digital output (F-DO) and restart the test stop.

Güvenlik: Enerjiyi kesmeden pano içi işlem yapmayın; emin değilseniz yetkili teknisyene danışın.

İlgili Siemens hata kodları