Siemens F30659

Qué Significa el Fallo

Fault: SI P2: Write request for parameter rejected

Causas probables

• The write request for one or several Safety Integrated parameters on processor 2 was rejected
• Note: This fault does not result in a safety stop response
• Fault value (r0949, interpret decimal): 10: An attempt was made to enable the STO function although this cannot be supported
• 15: An attempt was made to enable the motion monitoring functions integrated in the drive although these cannot be supported

Solución y Primeras Comprobaciones Seguras

1. check whether there are faults in the safety function alignment (F01655, F30655) and if required, carry out
2. use a Control Unit that supports the required function.
3. use the power unit with the feature "STO via terminals at the Power Module".

Seguridad: no trabajes dentro del cuadro sin cortar la energía; si tienes dudas, consulta a un técnico cualificado.

Códigos de error Siemens relacionados